Connecting using an HDMI Cable

•• When Dolby Atmos® is activated, “DOLBY ATMOS” appears in the front display.

•• Open the audio output options on the settings menu of your BD player or other device and make sure that “No Encoding” is selected for Bitstream. For example, on a Samsung BD Player, go to Home Menu → Sound → Digital Output and then select Bitstream (unprocessed).

•• If the Audio Output options include Secondary Audio, make sure Secondary Audio is set to Off.

•• Dolby Atmos® works only on 7.1.2 channels.

•• Make sure that the content supports Dolby Atmos®.

Connecting using an HDMI Cable

Top of the Soundbar

HDMI 1

OR

HDMI 2

Bottom of the Soundbar

1.Connect an HDMI cable from the HDMI IN 1 or HDMI IN 2 jack on the bottom of the Soundbar to the HDMI OUT jack on your digital device.

2.Connect an HDMI cable from the HDMI OUT (TV-ARC)jack on the bottom of the Soundbar to the HDMI IN jack on your TV.

3.Press the (Source) button on the top panel or on the remote control, and then select “HDMI1” or “HDMI 2”.

4.“HDMI1” or “HDMI 2” mode is displayed on the Soundbar display panel and sound plays.

ENG - 14