Connecting a TV via Bluetooth, The initial connection, (OR)

Connecting a TV via Bluetooth

When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.

•• Only one TV can be connected at a time.

OR

The initial connection

1.Press the PAIR button on the remote control to enter the “BT PAIRING” mode.

(OR) a. Press the (Source) button on the top panel and then select “BT”.

“BT” changes to “BT PAIRING” in a few seconds automatically or changes to “BT READY” if there is a connect record.

b.When “BT READY” appears, press and hold the (Source) button on the top panel of the Soundbar for more than 5 seconds to display “BT PAIRING”.

2.Select Bluetooth mode on the TV. (For more information, see the TV’s manual.)

3.Select “[AV] Samsung Soundbar C4-Series” or “[AV] Soundbar C4-Series” from the list on TV’s screen.

An available Soundbar is indicated with “Needs Pairing” or “Paired” on the TV’s Bluetooth device list. To connect the TV to the Soundbar, select the message, and then establish a connection.

•• When the TV is connected, [TV Name] → “BT” appears on the Soundbar’s front display.

4.You can now hear TV sound from the Soundbar.

If the Soundbar is not found by the TV

•• Connect the TV and Soundbar with an optical cable, and select the “D.IN” mode by pressing (Source) button on the top of the Soundbar. See if the audio output works normally, and

proceed with the step 2 and 3.

ENG - 21