Method 2. Connecting a TV using an HDMI Cable
CAUTION•• When both the HDMI cable and optical cable are connected, the HDMI signal is received first.
•• To connect the HDMI cable between the TV and Soundbar, be sure to connect the terminals marked ARC. Otherwise, the TV sound may not be output.
•• The recommended cable is High Speed HDMI Cable with Ethernet.Connect to the HDMI IN (ARC) | HDMI Cable |
| |
or (eARC) port of your TV. |
| ||
(not supplied) | Bottom of the Soundbar | ||
| |||
|
| ||
HDMI IN |
| HDMI TO TV | |
(ARC) |
| (ARC) | |
|
|
Connect to the HDMI TO TV (ARC) port of the Soundbar main unit.
Top of the Soundbar
TV ARC
1.With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the figure.
2.“TV ARC” appears in the display window of the Soundbar main unit and the Soundbar plays TV sound.
•• If TV sound is inaudible, press the 
(Source) button on the remote control or on the top of the Soundbar to switch to “D.IN” mode. The screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played.
•• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the
HDMI cable (not supplied) is connected to the correct port.
•• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.
ENG - 21
