06 CONNECTING A MOBILE DEVICE
Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
•• You cannot connect more than one Bluetooth device at a time.
Bluetooth device
OR
Bottom of the Soundbar
The initial connection
1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode.
(OR) a. Press the 
button on the bottom panel and then select “BT”.
“BT” changes to “BT READY” in a few seconds automatically if there is no Bluetooth device connected to the Soundbar.
b.When “BT READY” appears, press and hold the 
button on the bottom panel of the Soundbar for more than 5 seconds to display “BT PAIRING”.
2.On your device, select “[AV] Samsung Soundbar NWxxx” from the list that appears.
•• When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] → “BT” appears in the front display.
3.Play music files from the device, connected via Bluetooth, through the Soundbar.
If the device fails to connect
•• If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar NWxxx”) appears in the list, delete it.
•• Then repeat steps 1 and 2.
NOTE
––After you have connected the Soundbar to your mobile device the first time, use the “BT READY” mode to reconnect.
ENG - 18
