Connecting using an Optical Cable, Auto Power Link

Samsung Standard

HW-N650 HW-N650/ZA

Download 74 pages 12.91 Kb View all pages
Page 15
Page screenshot 15
Connecting using an Optical Cable

•• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the

HDMI cable is connected to the correct port.

•• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.

NOTES

•• HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.

•• If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.

•• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose diameter is less than 14 mm.

•• Anynet+ must be turned on.

•• This function is not available if the HDMI cable does not support ARC.

Connecting using an Optical Cable

 

 

Bottom of the Soundbar

 

 

AUX IN

 



DIGITAL AUDIO IN (OPTICAL)

OPTICAL OUT

Optical Cable

 

 

(not supplied)



 

 

D.IN

Right Side of the Soundbar

 

1.Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable (not supplied).

2.Press theD.IN(Source) button on the right side panel or remote control, and then select the “D.IN” mode.

Auto Power Link

Auto Power Link automatically turns on the Soundbar when the TV is turned on.

1.Connect the Soundbar and a TV with a digital optical cable (not supplied).

ENG - 11

Page 15
Page screenshot 15
Connecting using an Optical Cable, Auto Power Link - Samsung Standard