ID SET, ID SET, CAUTION

3.Press and hold the Up button on the remote control for at least 5 seconds.

•• The ID SET message appears on the display of the Soundbar for a moment, and then it disappears.

•• The Soundbar will automatically power on when ID SET is complete.

SOUND

MODE

CAUTION

•• If your Soundbar was playing music when it connects to the SWA-8500S, you may hear some stuttering from the woofer as the connection finalizes.

4.Check if the LINK LED is solid blue (connection complete)

5.If SWA-8500S is not connected, repeat the procedure from Step 2.

ENG - 8