Push a screw (not supplied) through each, Rear of Soundbar, Wall Mount R

5.Push a screw (not supplied) through each Holder-Screw, and then screw each screw firmly into a support screw hole.

6.Use the two Screws (M4 x L12) to attach both Bracket-Wall Mount L and R to the Soundbar's bottom. For a proper fit, make sure to align the bumps on the Soundbar to the holes on the brackets.

●When assembling, make sure the hanger parts of the Bracket-Wall Mounts are located behind the rear of the Soundbar. See the illustration below.

●The left and right mounts are different shapes. Make sure to position them correctly.

7.Install the Soundbar with the attached Bracket- Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall.

●Slightly tilt the Soundbar to insert both Holder-Screw heads into Bracket-Wall Mount holes. Push the Soundbar in the direction of the arrow to make sure both sides are firmly fixed.