DESCRIPTIONS
REMOTE CONTROL
SOURCE
Press to select a source connected to the Soundbar.Mute
You can turn the volume down to 0 with the push of a button.Press again to restore the sound to the previous volume level.Repeat
Press to set the Repeat function during music playback from a USB device. OFF - REPEAT : Cancels Repeat Playback.
TRACK - REPEAT : Repeatedly play a track.ALL - REPEAT : Repeatedly play all tracks.RANDOM - REPEAT : Plays tracks in random order.(A track that has already been played may be played again.)Skip Forward
If there is more than one file on the device you are playing, and you press the ] button, the next file is selected.
SOUND CONTROL
Press to select TREBLE, BASS, or AUDIO SYNC. Then, use the [,] buttons to adjust the Treble, Bass volume from
Press and hold the SOUND CONTROL button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz, 5KHz, 10KHz and SW are selectable and each can be adjusted to a setting between
If the Soundbar is connected to a digital TV and the video appears out of sync with the audio, press the SOUND CONTROL button to sync the audio with the video. Use the [,] buttons to set the audio delay between
0 ms and 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync function may not available.
AUTO POWER
Auto Power Link: Synchronizes the Soundbar to a connected Digital Optical source via the Digital Optical jack so it turns on automatically when you turn on your TV.
(Auto Power Link : Default OFF,
ENG
9
