Update procedure

Update procedure

- Warning –

It is very important ; please read the notice below before updating your unit. The following events may interrupt the update process and MAY RESULT IN PERMANENT DAMAGE TO THE UNIT WHILE UPDATING.

Ⅰ. Unplugging the power cord. Ⅱ. Power Outage.

Ⅲ. Dirt or Scratches on the disc.

Ⅳ. Opening a disc tray during processing

Ⅴ. Changing from "camera mode" to "play mode"

1)Turn on the power switch.

2)Insert the update disc with the software update

3)The message as "Loader Firmware is updating..." will appear on the screen automatically.

Loader Firmware is updating...

If this mark " " appears on the screen, the unit is already updated.

4)If this mark " " appears on the screen, remove power cord or battery from the unit and turn the power switch off.

5)After connecting power cord or inserting battery, remove the Disc from the unit.

6)Updating is finished.