![Quick Setup Guide](/images/backgrounds/7810/78101x1.webp)
Quick Setup Guide
Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
STOP | ||
Samsung Electronics America, Inc. | ||
Please do not return this unit. | 85 Challenger Road Ridgefield Park, NJ | |
Samsung Electronics Canada Inc. | ||
If you have problems operating your | 55 Standish Court Mississauga, Ontario L5R 4B2 | |
TV, call: | Call Center hours of operation: | |
AM EST. | ||
To register this product, visit: www.samsung.com/ | ||
For web support please visit: | ||
register. | ||
www.samsung.com/support | ||
|
Step 1: Install the Stand
Follow the steps below to connect the TV to the stand.✎✎NOTExx Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Step 4: Connect External Devices | Step 5: Run Plug & Play |
Connecting an AV device |
|
| When you turn on your TV for the first time, it automatically launches the Plug & | |||
|
| Play function. With Plug & Play, you can select the On Screen Display language, | ||||
Use one of the connections below to connect your TV to an external A/V device. We recommend using HDMI for the highest picture quality. |
| set the clock mode, and launch the TV’s channel memorizing process. | ||||
| It also displays connection instructions similar to those in this guide. |
| ||||
|
|
|
| |||
|
|
| To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow | |||
| Best Connection |
| buttons on your remote. To make a selection, press the ENTEREbutton. | |||
| HD connection (up to 1080p) | To skip a screen, press the MENU button. To turn on your TV, press the POWER | ||||
| button on the remote or on the TV. To run Plug & Play, follow these steps: | |||||
|
|
| ||||
| Using an HDMI Cable | 1 Using your remote control, select |
|
|
| |
| DVD, |
| Plug & Play |
| ||
Audio Cable | STB | the language for the On Screen | Select Language of the OSD. |
| ||
|
|
|
|
|
| |
(Not Supplied) | HDMI Cable (Not Supplied) |
| Display (OSD), and then press the |
|
| English |
| Device | Menu Language | : | Español | ||
| HDMI OUT | ENTEREbutton. | ||||
|
|
| ||||
|
|
|
|
| Français | |
|
|
|
|
|
|
Video Cable |
|
|
|
| 2 |
|
|
| |
|
|
|
|
|
| UMove EEnter | |||
(Not Supplied) |
| Very Good Connection | Select Home Use, and then |
| |||||
| |||||||||
|
|
|
|
|
|
| |||
|
|
|
|
|
| press the ENTEREbutton. If | Plug & Play | ||
|
|
|
|
|
|
| |||
|
|
|
|
| Component connection (up to 1080p) |
| you select Store Demo, the TV |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
| HDMI to DVI Cable (Not Supplied) |
| will reset your picture and audio | Select the usage mode. | |
|
|
|
|
|
| ||||
|
|
|
|
| Using an HDMI to DVI Cable |
| settings every 30 minutes. |
|
|
xx Stand the product up fasten the screws. If you fasten the screws with the with the LED tv placed down, it may lean to one side.
| Do not insert your fingers into the stand base slot of the TV when | ||
[[ |
|
| |
| installing the stand base. |
|
|
|
|
| Top view |
| Screws (M4 X L12) |
| |
| Guide Stand |
| |
1 Connect the Guide Stand to the Stand | s | s | |
| |||
s | s | ||
| Stand using four screws |
| s |
|
|
| |
| (M4 X L12) as shown. |
|
|
| 3 | Rear |
|
2 | Fasten two screws (M4 X L8) at | ||
With your TV upright, connect the | position 1, and then fasten three |
Component Cable
(Not Supplied)
Audio Cable
(Not Supplied)
Audio Cable (Not Supplied)
Good ConnectionComponent connection (up to 1080p)
Using a Component Cable
COMPONENT OUT | DVD, | ||
|
|
| STB satellite receiver, VCR |
| AUDIO OUT |
| Device |
DVI OUT
Device
AUDIO OUT
Lowest Quality ConnectionAudio/Video connection (480i only)
Using an Audio/Video Cable
| VIDEOAUDIOOUTOUT |
| DVD, |
|
| STB satellite receiver, VCR | |
|
|
| |
| VIDEO OUT |
| Device |
|
|
|
3 Select Antenna Source to | Store Demo |
| Home Use |
|
| Previous | UMove | EEnter | |
memorize. If Antenna Source is |
|
|
|
|
Cable or Auto, you must select | Plug & Play |
| ||
Antenna Source to same type |
| |||
Anrenna Source | : |
|
| |
as your cable system type. After | Air |
| ||
|
|
| ||
selecting source, select Search; | Digital Cable System | : |
| |
Cable |
| |||
then press the ENTEREbutton |
|
|
| |
Analog Cable System | : | Auto |
| |
on your remote. |
|
|
|
|
✎✎Most cable systems are |
| Search |
|
|
|
| UMove | EEnter | |
Standard(STD) systems, If you are |
|
| ||
|
|
|
| |
not sure about what kind of cable |
|
|
|
|
system you have, contact your cable company. |
|
|
|
✎✎If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After Plug & Play is complete, set your TV to Channel 3 or 4, according to the directions for your cable or satellite box.
TV to the Stand as shown. | screws (M4 X L8) at position 2. | ||
|
|
| s |
|
|
| s |
|
| 2 | s |
|
| s | |
|
|
| s |
s | s | Front |
|
|
| ||
s | s |
| |
| s |
|
|
Rear |
| 1 |
|
|
|
|
Step 2: Install the Batteries into the Remote
To install batteries into your remote control, follow these steps:
1.Lift the cover on the back of the remote upward as shown
in the figure to the right.
2.Install two AAA batteries. ✎✎ Make sure to match the
+and - ends of the batteries to the diagram in the battery compartment.3.Replace the cover.Connect your TV to your Home Theater or other audio device to enjoy enhanced Sound quality.
Analog Audio connection
Using an Audio Cable
Audio Cable (Not Supplied)
|
| Amplifier / DVD |
AUDIO IN |
| home theater |
|
| |
|
|
|
Digital Audio connection
Using an Optical Cable
Optical Cable (Not Supplied) |
| Digital Audio System | |
|
|
| |
| OPTICAL |
HD connection
Optical Cable (Not Supplied)
Using an HDMI to DVI Cable
DVI OUT
AUDIO OUT
Audio Cable (Not Supplied)
|
|
|
|
| Audio Cable | Using an | ||||||||
|
|
|
|
| ||||||||||
|
|
|
|
| ||||||||||
|
|
|
|
|
| |||||||||
|
|
|
|
| (Not Supplied) | AUDIO OUT | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| ||||
(Not Supplied) |
| |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| PC OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4
5
6
7
The TV memorizes the available channels. This process can take up to 45 minutes.
After the TV has memorized the channels, choose the Clock Mode. Select Auto if you have a digital channel in your area. Select Manual if you don’t, or if you have a cable or satellite box. When done, press the ENTERE button.
✎✎ If you select Manual, the clock setting screen appears.Select the daylight savings time setting: Off or On, and then press the ENTEREbutton.
Select the time zone in which you live, and then press the ENTEREbutton.Plug & Play
Removing scrambled channel.
DTV Cable | 14 |
76%
DTV Air | 0 | Air | 12 |
|
|
|
|
DTV Cable | 212 | Cable | 52 |
| Stop |
|
|
|
|
| EEnter |
| Plug & Play |
|
|
Set the Clock Mode. |
|
| |
Clock Mode | : | Auto |
|
|
| Manual |
|
|
| UMove | EEnter |
| Plug & Play |
|
|
Set to daylight saving time. |
|
| |
DST | : | Off |
|
|
| On |
|
|
| UMove | EEnter |
Step 3: Connect Antenna or Cable
VHF/UHF Antenna
Antenna Cable | Connect Ant In to |
|
8
9
After the time zone screen, The connection method for best HD screen quality is displayed. Press Right arrow button on your remote to view each screen in succession. Press the Blue button to skip this section.
The Enjoy your TV. screen appears. Then press the ENTEREbutton.
|
|
|
|
|
|
| • | Wall cable jack |
|
|
|
|
|
|
| • VHF/UHF Antenna | |
|
|
| or |
| ||||
|
|
|
| • | Cable or Satellite box | |||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| Ant or Cable Out |
Use a 75 ohm (round) cable. |
| |||||||
|
|
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
| If You Want to Rerun Plug & Play | ||
1. | Press the SOURCE button on your remote, then select TV mode. | ||
2. | Press the MENU button on your remote to display the menu. | ||
| |||
| 3. | Press the ▲ or ▼ button to select Setup, and then press ENTERE. | |
| 4. | Press ENTEREagain to select Plug & Play. |