Step 6: Remote Control
Remote Control Buttons and Functions
✎✎This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume buttons.
Changing Channels and Adjusting the Volume
Adjust the volume by pressing the Volume button |
|
|
| MUTE |
| Change the channels by pressing the Channel button on the remote. | ||
on the remote. |
|
|
|
| ||||
|
|
|
|
| ✎✎If your TV is attached to a cable or satellite box, change the channel using | |||
|
|
|
|
|
|
|
| |
|
|
|
|
|
| CH LIST |
| the box’s remote. |
|
|
|
|
|
| |||
|
|
|
|
|
| MENU |
|
|
✎✎You can also change the channels by pressing the z button on the front panel of your TV and adjust the volume by pressing the ybutton.
Turns the TV on and off.
Selects the HDMI mode directly.
Press to directly access channels.
Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel
Adjusts the volume.
POWER SOURCE
HDMI
PRE-CH
MUTECH LISTMENUTurns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to off will reduce the battery usage time.)
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays channel list on the screen.
Selecting a Source
To watch a movie on your |
|
|
your favorite TV show, you must select the correct | POWER | SOURCE |
source. A source is a device, such as a |
| |
| ||
| ||
player, a cable/satellite box, antenna or a cable TV | HDMI | |
input. Sources can be connected to your TV through | ||
| ||
the HDMI, DVI, Component, Composite, or |
| |
connections, or through the Antenna or Cable In connections. |
|
To view the signal from a source connected to the HDMI, DVI, Component, Composite, or
Viewing the On Screen Menus
To view the On Screen Menus, follow these steps: |
| CH LIST | |
|
| ||
1. With the power on, press the MENU button on | MEDIA.P | MENU | |
FAV.CH | |||
your remote. The main menu appears. | TOOLS | INFO | |
The menu’s left side has the following menu | |||
|
| ||
options: Picture, Sound, Channel, Setup, |
|
| |
Input, Application, and Support. |
|
|
2.Press the ▲ or ▼ button on your remote to select a menu option, and then press the ENTEREbutton.
3.When done using the menu, press the EXIT button on your remote to exit.
Changing the Picture Mode
Your TV has three preset Picture Modes with factory adjusted settings, each designed to give you an excellent picture under specific conditions.
To change the Picture mode, press the P.MODE button on your remote. The first time you press it, your TV displays the current setting. Thereafter, each time you press the P.MODE button, you change the mode of the picture on the screen.
The Picture Modes are listed and described in the table below:
Mode | Description |
Dynamic | Brightens picture. For a vibrant, enhanced image in brightly lit or |
| sunny room. |
Standard | For a bright, detailed picture in a normally lit room. |
Movie | For a studio quality cinema picture in a dimly lit or dark room. |
|
|
To change the Picture Mode, follow these steps:
1.With the TV on, press the TOOLS button on your remote. The Tools menu appears.
2.Using the ▲ or ▼ on your remote, select Picture Mode.
3.On the Picture Mode menu, use the ◄ or ► on your remote to select the Picture Mode you want.
4.Press the EXIT button to exit the menu.
Views Media Play (USB).
Quickly select frequently used functions.
Returns to the previous menu.
These buttons are for the Channel list, Media Play (USB) menu, etc.Use these buttons in Media Play (USB) and Anynet+
MEDIA.P FAV.CH
TOOLSINFORETURNEXITA B C D
S.MODE SLEEP MTS
P.MODE P.SIZE CC
Display Favorite Channel Lists on the screen.
Displays information on the TV screen.
Selects the on-screen menu items and changes the values seen on the menu.
Exits the menu.
S.MODE : Press to select the sound mode.
SLEEP : Use to set the sleep timer function.
MTS : Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
P.MODE : Press to select the picture mode.
Changing the Screen Size
Your TV has several screen size options, each designed to work best with specific types of video input. If you have a cable box or satellite receiver, it may have its own set of screen sizes as well.
To change the screen size, press the P.SIZE button on your remote. The first time you press it, your TV displays the current setting. Thereafter, each time you press the P.SIZE button, you change the size of the picture on the screen.
The following sizes are available:
16:9 Wide screen | 4:3 Standard screen | Wide Fit |
Setting the Clock
Before you can use your TV’s On/Off Timer, you must set the clock. To set the clock, follow these steps:
1.Turn on your TV, press the MENU button on your remote, then select Setup → Time.
2.Select Clock Mode, and then press the ENTEREbutton.
3.Choose Auto or Manual.
xx If you select Auto, the current time will be set automatically using the time from a digital channel.
xx If you select Manual, you can set the Month, Day, Year, Hour, Minute and am/pm directly by pressing up, down, left and right arrow button on your remote.
4.Press the RETURN button on your remote when done.
Connecting a USB Device for Media Play
Samsung recorders that have the Anynet+ feature)
P.SIZE : Selects the picture size.
CC: Controls the caption decoder.
Zoom 1 | Zoom 2 | Screen Fit |
✎✎Screen Fit: Displays the full image without any
You can enjoy photo, music, and movie files stored on a USB device by connecting it to the TV and using the Media Play feature. For Media Play operating instructions, please see your Owner’s Manual.
MediaPlay
Videos
SUM |
| Change Device |
| View Devices EEnter RReturn |
1.Turn on your TV.
2.Connect a USB device containing photo, music and/or movie files to the USB (HDD) jack on the side of the TV.
3.When USB is connected to the TV, popup window appears. Then you can select Media Play.
