HW-B57C SAFETY INFORMATION
SAFETY WARNINGS
WARNING
CAUTION
FCC NOTE (for U.S.A):
FCC Supplier’s Declaration of Conformity Important Safety Instructions PRECAUTIONS CONTENTS
Checking the Components
Product Overview
Using the Remote Control
Connecting the Soundbar
Using a wired connection to the TV
Using a wireless connection to the TV Connecting an External Device
Connecting a USB Storage Device
Connecting a Mobile Device
Installing the Wall Mount
Software Update
Troubleshooting
License
Open Source License Notice
Important Notes About Service
Specifications and Guide 01 CHECKING THE COMPONENTS
Wireless Surround Speaker SET (SWA-9100) 02 PRODUCT OVERVIEW
Front Panel / Top Panel of the Soundbar Bottom Panel of the Soundbar 03 USING THE REMOTE CONTROL
How to Use the Remote Control Output specifications for the different sound effect modes Adjusting the Soundbar volume with a TV remote control 04 CONNECTING THE SOUNDBAR
Connecting Electrical Power Connecting the Soundbar to the Subwoofer
Automatic connection between the Subwoofer and the Soundbar
LED Indicator Lights on the Rear of Subwoofer Manually connecting the Subwoofer if automatic connection fails
Before performing the manual connection procedure below: NOTES
PRECAUTIONS Connecting an SWA-9100to your Soundbar
1. Connect the Wireless Receiver Module to 2 Surround Speakers 2. Check the standby status after plugging into an electrical outlet
3. Configure “ID SET” using the Soundbar’s remote control 4. Check if the LINK LED is solid blue (connection complete)
If the Method 1. Connecting a TV using an HDMI Cable TV ARC
(Source)
D.IN
D.IN
TV ARC
TV ARC
NOTES Pre-connectionChecklist Connecting a TV via Bluetooth
The initial connection
(OR)
If the device fails to connect
NOTE Disconnecting the Soundbar from the TV
What is the difference between BT READY and BT PAIRING 07 CONNECTING AN EXTERNAL DEVICE
Method 1. Connecting using an HDMI Cable Method 2. Connecting using an Optical Cable 08 CONNECTING A USB STORAGE DEVICE
File Format Type Compatibility list 09 CONNECTING A MOBILE DEVICE
Connecting via Bluetooth
If the device fails to connect Bluetooth Power On (SOUND MODE) Disconnecting the Bluetooth device from a Soundbar
Disconnecting the Soundbar from the Bluetooth device
More About Bluetooth Bluetooth Multi connection
Bluetooth Multi Pairing Wallmount Components
WALL MOUNT
Installation Precautions Center Line
Wall Mount Guide
Holder-Screw How to check the Firmware version Update Procedure
If UPDATE is not displayed 12 TROUBLESHOOTING There is no sound in when connecting to the TV in HDMI TO TV (ARC) mode
Soundbar does not connect via Bluetooth
BT PAIRING
PAIR
(Source)
BT READY
Left
ON-TV
CONNECT
OFF-TV
CONNECT
Left
Sound drops out when connected via Bluetooth
Bluetooth multi connection does not work
(Refer to the “Soundbar does not connect via Bluetooth.” section.)
Sound drops out when connected via Bluetooth
Soundbar does not turn on automatically with the TV 13 LICENSE 14 OPEN SOURCE SPECIFICATIONS AND GUIDE
Specifications
NOTES LIMITED WARRANTY TO ORIGINAL PURCHASER