![Manual background](/images/backgrounds/7907/790721x1.webp)
By pressing the button, you can adjust the volume of the each speaker.
CH LEVEL | •• | Press the button to select VIRTUAL CENTER LEVEL and then adjust the volume |
CH LEVEL |
| between |
•• | If the Rear Speakers are connected, the setting REAR LEVEL is supported. To adjust the | |
|
| volume of the REAR LEVEL between |
By pressing the button, you can set the audio function. The desired settings can be adjusted using the Up/Down buttons.
AUDIO SYNC NIGHT MODE ON/OFF VOICE ENHANCE ON/OFF
Sound Control
If the video on the TV and audio from the Soundbar are not synchronized, press the (Sound Control) button to select AUDIO SYNC and then set the audio delay between 0~300 milliseconds by using the Up/Down buttons. (Not available in “USB” or “BT” mode.)
––NIGHT MODE ON/OFF
This mode is optimized for nighttime viewing with the settings adjusted to bring the volume down but keep the dialog clear.
––VOICE ENHANCE ON/OFF
This mode is makes it easier to hear spoken dialog in movies and TV.
•• The NIGHT MODE, and VOICE ENHANCE audio function can be turned ON/OFF by using the Up/Down buttons.
•• Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be adjusted to a setting between
Switch the Soundbar to Bluetooth pairing mode.
Press the PAIR button and wait for the “BT PAIRING” screen to connect to a new
Bluetooth
PAIR
Bluetooth device.
You can also play or pause music by pressing the button.
Play / Pause
ENG - 11