Samsung Standard

HW-B53M HW-B53M/ZA

Download 42 pages 53.93 Kb View all pages
Page 11
Page screenshot 11
Manual background

By pressing the button, you can adjust the volume of the each speaker.

CH LEVEL

••

Press the button to select VIRTUAL CENTER LEVEL and then adjust the volume

CH LEVEL

 

between -6~+6 by using the Up/Down buttons.

••

If the Rear Speakers (sold separately) are connected, the setting REAR LEVEL is

 

 

supported. To adjust the volume of the REAR LEVEL between -6 to +6 by using the Up/

 

 

Down buttons.

By pressing the button, you can set the audio function. The desired settings can be adjusted using the Up/Down buttons.

AUDIO SYNC NIGHT MODE ON/OFF VOICE ENHANCE ON/OFF

Sound Control ––AUDIO SYNC

If the video on the TV and audio from the Soundbar are not synchronized, press the Manual background (Sound Control) button to select AUDIO SYNC and then set the audio delay between 0~300 milliseconds by using the Up/Down buttons. (Not available in “USB” or “BT” mode.)

––NIGHT MODE ON/OFF

This mode is optimized for nighttime viewing with the settings adjusted to bring the volume down but keep the dialog clear.

––VOICE ENHANCE ON/OFF

This mode is makes it easier to hear spoken dialog in movies and TV.

•• The NIGHT MODE, and VOICE ENHANCE audio function can be turned ON/OFF by using the Up/Down buttons.

•• Press and hold the Manual background (Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be adjusted to a setting between -6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to “STANDARD”.)

Switch the Soundbar to Bluetooth pairing mode.

Press the Manual background PAIR button and wait for the “BT PAIRING” screen to connect to a new

Bluetooth

PAIR

Bluetooth device.

You can also play or pause music by pressing the button.

Play / Pause

ENG - 11

Page 11
Page screenshot 11
 - Samsung Standard HW-B53M/ZA