Connecting an SWA-8500S(Sold Separately) to your Soundbar, NOTES, PRECAUTIONS

Samsung Standard

HW-R60C HW-R60C/ZA

Download 41 pages 7.73 Kb View all pages
Page 14
Page screenshot 14
NOTES
NOTES

•• Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete.

•• Before moving or installing this product, be sure to turn off the power and disconnect the power cord.

•• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear of the sub-woofer will turn red after blinking in blue several times.

•• If you use a device that uses the same frequency (5.8GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption.

•• The maximum transmission distance of the main unit’s wireless signal is about 32.8 ft, but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all because the wireless signal cannot penetrate metal.

PRECAUTIONS

•• Wireless receiving antennas are built into the wireless subwoofer. Keep the unit away from water and moisture.

•• For optimal listening performance, make sure that the area around the wireless subwoofer and the Wireless Receiver Module (sold separately) is clear of any obstructions.

Connecting an SWA-8500S (Sold Separately) to your Soundbar

Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-8500S, sold separately) to your Soundbar.

1.Connect the Wireless Receiver Module to 2 Surround Speakers.

––The speaker cables are color coded.

SURROUND-LEFT

SURROUND-LEFT

L

R

SURROUND SPEAKERS OUT

SPEAKER IMPEDANCE : 3Ω

 

ID SET

L

R

SURROUND SPEAKERS OUT

POWER

SURROUND-RIGHT

SURROUND-RIGHT

ENG - 8

Page 14
Page screenshot 14
Connecting an SWA-8500S(Sold Separately) to your Soundbar, NOTES - Samsung