Samsung Standard

HW-R60C HW-R60C/ZA

Download 41 pages 7.73 Kb View all pages
Page 29
Page screenshot 29
Manual background

Press theManual background PAIR button. “BT PAIRING” appears in the Soundbar’s display.

PAIR

You can connect the Soundbar to a new Bluetooth device in this mode by selecting the

Bluetooth

Soundbar from the Bluetooth device's search list.

 

PAIR

 

Press the pbutton to pause a music file temporarily.

When you press the button again, the music file plays.

••

Auto Power Down Function

Play / Pause

The unit turns off automatically in the following situations:

––In D.IN / HDMI / BT / USB Mode : If there is no audio signal for 20 minutes.

––In AUX Mode :

––If the Audio (AUX) Cable is disconnected for 20 minutes.

––If there is no KEY input for 8 hours when the Audio (AUX) Cable is connected. (The Auto Power Down function can be turned off only when the unit is in “AUX” mode.)

––To turn off Auto Power Down function while the unit is in “AUX” mode, press and hold the pbutton for 5 seconds. ON-AUTO POWER DOWN” / “OFF- AUTO POWER DOWN” appears on the display.

Manual background

Up/Down/

Left/Right

Press the indicated areas to select Up/Down/Left/Right.

Press Up/Down/Left/Right on the button to select or set functions.

•• Repeat

To use the Repeat function in “USB” mode, press the Up button.

•• Music Skip

Press the Right button to select the next music file. Press the Left button to select the previous music file.

•• Anynet+ / Auto Power Link

You can turn Anynet+ and Auto Power Link on or off.

Anynet+ and Auto Power Link are turned on and turned off by the Right and Left buttons respectively.

––Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable, you can control your Soundbar with a Samsung TV remote control.

Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF.

––Auto Power Link : If the Soundbar is connected to your TV through a digital optical cable, the Soundbar can automatically turn on when you turn on your TV. Press and hold the Left button for 5 seconds to toggle Auto Power Link ON and OFF.

––Anynet+ / Auto Power Link are set to ON by default.

•• ID SET

Press and hold the Up button for 5 seconds to complete ID SET (when connecting to an accessary item).

ENG - 23

Page 29
Page screenshot 29
 - Samsung Standard HW-R60C/ZA