INSTALLATION
++Controlling the Soundbar using Your TV Remote Control
1.Press and hold the 
SOUND button for more than 5 seconds while the Soundbar is turned on.
●● TV menus differ by manufacturer and model. Refer to the TV's user manual for further information. ●● Only the VOLUME +/- and the MUTE buttons will be available to control the Soundbar.
●● This function is not available when the Soundbar is in the TV SoundConnect mode. ●● Manufacturers supporting this function:
- VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA- This function may not be compatible with your TV's remote depending on the remote control's manufacturer. ●● To turn off this function, press the 
SOUND button for 5 seconds. "OFF - TV REMOTE" appears on the
INSTALLING THE BATTERY IN THE REMOTE CONTROL
1.Use a suitable coin to turn the remote control's battery cover counterclockwise to remove it as shown in the figure above.
2.Insert a 3V lithium battery. Keep the positive (+) pole facing up when inserting the battery. Put the battery cover on and align the '●' marks side by side as shown in the figure above.
3.Use a suitable coin to turn the remote control battery cover clockwise as far as it will go to fix it in place.
12
