SOFTWARE UPDATE, INSTALLING THE WALL MOUNT, Auto Update, Updating with USB

SOFTWARE UPDATE

Auto Update

The automatic update function is enabled on the Soundbar by default. Automatic firmware updates are searched for and performed if the Soundbar is connected to the Internet, irrespective of whether it is turned on or off.

cTo use the Auto Update function, the Soundbar must be connected to the Internet.

The Wi-Fi connection to the Soundbar will be terminated if its power cord is disconnected or the power is cut off. If the power is cut off, turn on the Soundbar and reconnect it.

Updating with USB

SERVICE

If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar.

For more information about how to download update files, go to the Samsung Electronics website at (samsung.com/sec)  search for the model name  download the firmware from the customer support menu option. The option name can vary.

INSTALLING THE WALL MOUNT

Installation Precautions

•Do not install the Soundbar system in a location with high temperature and/or humidity. Install the system on a stable wall that can bear the weight of the Soundbar main unit.

•Check the strength of the wall. To install the Soundbar system on a wall that may not bear the Soundbar main unit weight, reinforce the wall before installation. If this is not possible, install the system on another wall, one stable enough to bear the weight of the Soundbar main unit

•Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.). If possible, fix the support screws into wall studs.

•Purchase wall mounting screws according to the type and thickness of the wall you will mount the Soundbar on.

•Connect cables from the unit to external devices before you install it on the wall.

•Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.