TROUBLESHOOTING
TROUBLESHOOTING
Before requesting service, please check the following.The unit will not turn on.
• Is the power cord plugged into the outlet?
Connect the power plug to the outlet.
A function does not work when the button is pressed.
• Is there static electricity in the air?
Disconnect the power plug and connect it again.
Sound is not produced.
•Is the Mute function on?•Is the volume set to minimum?
Press the 
(Mute) button to cancel the function.Adjust the Volume.
(Mute) button to cancel the function.Adjust the Volume.The remote control does not work.
•Are the batteries drained?•Is the distance between the remote control and main unit too far?
Replace with new batteries.Move closer to the unit.
The TV SoundConnect (TV pairing) failed.
•Does your TV support TV SoundConnect?•Is your TV firmware the latest version?•Does an error occur when connecting?•Reset the TV mode and connect again.
TV SoundConnect is supported by some Samsung TVs released from 2012 on. Check your TV to see if it supports TV SoundConnect.
Update your TV with the latest firmware.Contact the Samsung call center.Press and hold the & button for 5 seconds to reset the TV SoundConnect connection.
The red LED on the subwoofer blinks and the subwoofer is not producing sound.
•Your subwoofer may not be connected to the main body of the product.
Try to connect your subwoofer again. (See Page 15)
The subwoofer drones and vibrates noticeably.
• Try to adjust the vibration of your subwoofer.
Press the WOOFER button on your remote control to adjust its value (between
28
