CONNECTING TO YOUR TV, Method 1. Connecting with a Cable, D.IN

5.While the subwoofer's indicator is flashing blue, press the button on your remote control or on the top of the Soundbar main unit to turn on the Soundbar main unit.

6.The connection is complete if the indicator on the front of the subwoofer stops flashing and glows continuously.

cIf the connection process fails, the blue indicator will flash continuously. Go to Step 2 and start again.

Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-8000S) to your Soundbar. (Sold separately)

cFor further information, refer to the Web Manual.

CONNECTING TO YOUR TV

You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.

cImportant: Before you begin, put the battery into the remote. See page 11 for instructions.

Method 1. Connecting with a Cable

1.Connect the OPTICAL IN (Audio) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable.

2.Press the button on the top panel of the Soundbar or the SOURCE button on the remote control to select the D.IN mode.

D.IN

cIf TV sound is not output, press the button on the top of your Soundbar or the SOURCE button on the remote control to select the D.IN mode on Soundbar main unit display.

cIf the Soundbar main unit display does not change to D.IN, disconnect the HDMI cable.

cPress the  button on the remote control for 5 seconds to turn Auto Power Link on or off. (Auto Power Link is set to ON by default.)

· 5 · English