Step 2 : Configuring Settings on the TV

Step 2 : Configuring Settings on the TV

•• If the TV disconnects from your wireless network after you change the input source to the Soundbar, use the TV menu to connect the TV to the network again.

For TVs released in 2018

Home () Settings ( ) Sound Sound Output [AV] Samsung Soundbar Nxxx (Wi-Fi)

For TVs released in 2017

Home () Settings ( ) Sound Sound Output [AV] Samsung Soundbar Nxxx (Wi-Fi)

For TVs released in 2016

Home ( ) Settings ( ) Sound Select Speaker [AV] Samsung Soundbar Nxxx (Wi-Fi)

For TVs released in 2015

Menu Sound Speaker List

For TVs released in 2014

Menu Sound Speaker Settings Multiroom Link - Settings

NOTES

•• The TV and Soundbar must be connected to the same wireless network (Wi-Fi).

•• If your wireless router (Wi-Fi) uses a DFS channel, you will not be able to establish a Wi-Fi connection between the TV and Soundbar. Contact your Internet service provider for details.

•• If the 5GHz Wi-Fi connection is not smooth, use the 2.4GHz bandwidth.

•• Because the menus may differ depending on the year of manufacture, refer to your TV manual.

ENG - 14