7 Band EQ
Press and hold the 
(Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be adjusted to a setting between
7 Band EQ
5 Sec
Press and hold the | (Sound Control) button | Using the Left/Right buttos and each can be | ||
for about 5 seconds. |
| adjusted to setting between | ||
|
|
|
|
|
|
| “150Hz” |
| “150Hz” “300Hz” “600Hz” “1.2kHz” |
|
|
| “2.5kHz” “5kHz” “10kHz” | |
|
|
|
| |
|
|
|
|
|
Bluetooth PAIR
Switch the Soundbar to Bluetooth pairing mode.
When you press the button, the LED display changes as shown below.
•• Until pairing is complete, the Multicolor LED changes as Red → Green → Blue in turn.
LED | Red → Green → Blue Blinks | Cyan Blinks X3 |
|
| |
Indicator |
|
|
| Pairing | Connection is complete |
p(Play / Pause)
You can also play or pause music by pressing the button in "USB" mode.
Up/Down/Left/Right
Press Up/Down/Left/Right on the button to select or set functions.
•• Repeat
To use the Repeat function in “USB” mode, press the Up button.
•• Music Skip
Press the Right button to select the next music file. Press the Left button to select the previous music file.
(Info)
Press the button to display information about the current function. (See page 9.)
ENG - 13
