04 CONNECTING THE SOUNDBAR
Connecting Electrical Power
Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following order:
1.Connect the power cord to the Subwoofer.
2.Connect the power output cable to the power adapter, and then to the Soundbar.
3.Connect the power cord to a wall socket.
See the illustrations below.
•• For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit)
|
| DC 24V | Power Cord |
POWER | Power Cord |
| |
|
| ||
|
|
| |
|
| USB (5V 0.5A) | Connecting |
|
| DC 24V | Electrical Power |
|
|
| |
|
| Bottom of the | AC/DC Adapter |
|
| Soundbar Main Unit | |
|
|
| |
Rear of Subwoofer | Connecting |
|
|
| Electrical Power |
|
|
•• Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.
ENG - 16
