![Manual background](/images/backgrounds/7954/795459x1.webp)
Press the PAIR button. “BT PAIRING” appears in the Soundbar’s display.
PAIR | You can connect the Soundbar to a new Bluetooth device in this mode by selecting the |
Bluetooth | Soundbar from the Bluetooth device's search list. |
| |
PAIR |
|
Press the pbutton to pause a music file temporarily.
When you press the button again, the music file plays. | |
•• | Auto Power Down Function |
Play / Pause | The unit turns off automatically in the following situations: |
––In D.IN / BT / USB Mode : If there is no audio signal for 20 minutes.
––In AUX Mode :
––If the Audio (AUX) Cable is disconnected for 20 minutes.
––If there is no KEY input for 8 hours when the Audio (AUX) Cable is connected. (The Auto Power Down function can be turned off only when the unit is in “AUX” mode.)
––To turn off Auto Power Down function while the unit is in “AUX” mode, press and hold the pbutton for 5 seconds.
Up/Down/
Left/Right
Press the indicated areas to select Up/Down/Left/Right.
Press Up/Down/Left/Right on the button to select or set functions.
•• Repeat
To use the Repeat function in “USB” mode, press the Up button.
•• Music Skip
Press the Right button to select the next music file. Press the Left button to select the previous music file.
•• Auto Power Link
You can turn Auto Power Link on or off.
Auto Power Link is turned on and turned off by the Left button respectively.
––Auto Power Link : If the Soundbar is connected to your TV through a digital optical cable, the Soundbar can automatically turn on when you turn on your TV. Press and hold the Left button for 5 seconds to toggle Auto Power Link ON and OFF.
––Auto Power Link is set to ON by default.
•• ID SET
Press and hold the Up button for 5 seconds to complete ID SET (when connecting to an accessary item).
ENG - 24