Press the
PAIR button. “BT PAIRING” appears in the Soundbar’s display.
PAIR | You can connect the Soundbar to a new Bluetooth device in this mode by selecting the |
Bluetooth | Soundbar from the Bluetooth device's search list. |
| |
PAIR |
|
|
|
Press the pbutton to pause a music file temporarily. | |
| When you press the button again, the music file plays. |
Play / Pause |
|
Up/Down/
Left/Right
Press the indicated areas to select Up/Down/Left/Right.
Press Up/Down/Left/Right on the button to select or set functions.
•• Repeat
To use the Repeat function in “USB” mode, press the Up button.
•• Music Skip
Press the Right button to select the next music file. Press the Left button to select the previous music file.
•• Auto Power Link
You can turn Auto Power Link on or off.
Auto Power Link is turned on and turned off by the Left button respectively.
––Auto Power Link : If the Soundbar is connected to your TV through a digital optical cable, the Soundbar can automatically turn on when you turn on your TV. Press and hold the Left button for 5 seconds to toggle Auto Power Link ON and OFF.
––Auto Power Link is set to ON by default.
•• ID SET
Press and hold the Up button for 5 seconds to complete ID SET (when connecting to an accessary item).
You can select TREBLE, BASS, or AUDIO SYNC.
•• To control the volume of the treble or bass sound, select TREBLE or BASS in Sound Settings, and then adjust the volume between
Sound Control •• If the video on the TV and audio from the Soundbar are not synchronized, select AUDIO SYNC in Sound Settings, and then set the audio delay between 0~300 milliseconds by using the Up/Down buttons. (Not available in “USB” mode.)
•• AUDIO SYNC is only supported for some functions.
ENG - 18
