![Manual background](/images/backgrounds/7991/799151x1.webp)
SOUND | You can select the desired sound effect by choosing STANDARD, MUSIC, CLEAR VOICE, | |
| MODE | SPORTS, or MOVIE. |
| SOUND MODE | •• DRC (Dynamic Range Control) |
| Lets you apply dynamic range control to Dolby Digital tracks. If you press and hold the | |
|
| |
|
| SOUND MODE button while in standby mode, DRC (Dynamic Range Control) turns on |
|
| or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.) |
Press to select a source connected to the Soundbar.
| •• BT PAIRING mode |
|
Source | To turn on “BT PAIRING” mode in “BT” mode, press and hold the | (Source) button |
for more than 5 seconds. See page 15 for details. |
| |
|
|
Press the pbutton to pause a music file temporarily.
If you press the button again, the music file plays.
Play / Pause
Up/Down/
Left/Right
Press the indicated areas to select Up/Down/Left/Right.
Press Up/Down/Left/Right on the button to select or set functions.
•• Repeat
To use the repeat function, press the Up button.
•• Music Skip
Press the Right button to select the next music file. Press the Left button to select the previous music file.
•• Anynet+ / Auto Power Link
You can turn Anynet+ and Auto Power Link on or off.
Anynet+ and Auto Power Link are controlled by the Right and Left buttons respectively.
––Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable, you can control your Soundbar with the Samsung TV’s remote control.
Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF.
––Auto Power Link : If the Soundbar is connected to your TV through a digital optical cable, the Soundbar can automatically turn on when you turn on your TV. Press and hold the Left button for 5 seconds to toggle Auto Power Link ON and OFF.
––Anynet+ / Auto Power Link are set to ON by default.
ENG - 20