10 TROUBLESHOOTING
Before seeking assistance, check the following.
;; Connect the power plug to the outlet.
A function does not work when the button is pressed.Is there static electricity in the air?;; Disconnect the power plug and connect it again.
Sound dropouts occur in BT mode.;; See the Bluetooth connection sections on pages 9 and 15.
Sound is not produced.Is the Mute function on?;; Press the VOL button to cancel the function.
Is the volume set to minimum?;; Adjust the Volume.
The remote control does not work.Are the batteries drained?;; Replace with new batteries.
Is the distance between the remote control and Soundbarmain unit too far?;; Move the remote control closer to the Soundbar main unit.
;; Check if the cable is connected correctly. (Check the port name to make sure that the cable is connected to the correct port.) (See the corresponding page regarding each connection method.)
;; Press the 
(Source) button on the right side of the Soundbar or on the remote control to check if the mode is correct.
If connected via a wireless network ;; Connected via Bluetooth
1.Switch the Soundbar to “BT PAIRING” mode, and then use the TV to search
again. (See page 9 for details.) ;; Connected via
1.Check if the TV is a compatible model.
•• Only Samsung smart TVs released after 2014 are supported.2.Check if the TV is connected to
•• If the TV is not connected to
ENG - 26
