CONNECTIONS
CONNECTING TO A TV
CONNECTING TO A TV USING A DIGITAL OPTICAL CABLE
Optical Cable
OPTICAL OUT | OPTICAL IN |
OPTICAL IN
1.Connect the OPTICAL IN (Audio) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable.
2.Press the 
(Source) button on the top panel of the Soundbar or the SOURCE button on the remote control to select the D.IN mode.
++Auto Power Link
If you have connected the main unit to a TV with a digital optical cable, you can set the Auto Power function ON to have the Soundbar turn on automatically when you turn the TV on.
AUTO POWER LINK | Display |
|
|
ON | OFF - ANYNET+ / ON - POWER LINK |
|
|
OFF | ON - ANYNET+ / OFF - POWER LINK |
|
|
1.Connect the Soundbar and a TV with a digital optical cable.
2.Press the 
(Source) button on the main unit’s top panel or the SOURCE button on the remote control to select the D.IN mode.
3.Press the Anynet+ button on the remote control to toggle the Auto Power Link function on and off.
●● Depending on the connected device, Auto Power Link may not function.
16
