INSTALLATION
INSTALLATION
INSTALLING THE WALL MOUNT
You can use the wall mount bracket to mount this unit on a wall.INSTALLATION PRECAUTIONS
●● Install on a vertical wall only.●● For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight of the set.
●● Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install the unit on a different wall that can support the unit's weight.
●● Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.). If possible, fix the support screws into wall studs.
●● Purchase wall mounting screws according to the type and thickness of the wall you will mount the Soundbar on.
●● Connect cables from the unit to external devices before you install it on the wall.
●● Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
2 inches or more1.Place the installation guide against the wall surface.•The installation guide must be level.•If the TV is mounted on the wall, install the Soundbar at least 2 inches (5 cm) below the TV.
2.Mark the location where the screws will go through on the wall, and then remove the installation guide. Next, drill holes for the screws using an appropriately sized drill bit.
ENG
11
