REMOTE CONTROL
REMOTE CONTROL
REMOTE CONTROL BUTTONS AND FUNCTIONS
SOURCEPress to select a source connected to the Soundbar.
MUTEYou can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
REPEATPress to set the REPEAT function during music playback from a USB device.
(A track that has already been played may be played again.)
Skip ForwardIf there is more than one file on the device you are playing, and you press the ] button, the next file is selected.
SOUND CONTROL (*Use the [,] buttons to adjust level.)
Press to select TREBLE, BASS, or AUDIO SYNC. Then, use the [,] buttons to adjust the Treble, Bass volume from
If the Soundbar is connected to a digital TV and the video appears out of sync with the audio, press the SOUND CONTROL button to sync the audio with the video. Use the [,] buttons to set the audio delay between 0 ms and 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync function may not work.
Press and hold the SOUND CONTROL button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz,2.5KHz, 5KHz and 10KHz are selectable and each can be adjusted to a setting between
Auto Power Link: Synchronizes the Soundbar to a connected Optical source via the Optical jack so it turns on automatically when you turn on your TV.
(Auto Power Link : Default OFF,
*Anynet+:Press the AUTO POWER button to turn the Anynet+ function on or off.
WOOFER (*Use the [,] button to adjust volume )
You can control the woofer volume.
Press the [,] button to increase or decrease the subwoofer volume.
You can select SW
●● Soundbar is a Samsung proprietary name.
●●Operate the TV using the TV's remote control.
ENG
9