Connecting via the NFC feature, Connecting devices manually, On the

Registering the device and connecting via the Bluetooth feature

Connecting via the NFC feature

1Activate the NFC and Bluetooth features on the other device.

2Turn on the device and place the other device’s NFC antenna near the NFC antenna area of your device.

Device connection is complete after you allow other devices to connect to your device.

When the devices are connected properly, the notification light flashes blue at regular intervals.

•NFC antenna area may differ depending on the connected devices. For more information, refer to the user manual of the connected device.

•Ensure that the screen on the connected device is unlocked before connecting your device. The NFC feature does not work when the connected device's screen is locked.

Connecting devices manually

Before using the Bluetooth feature for the first time, pair your device with other Bluetooth-enabled devices. Once your device is paired, the recently-connected device automatically connects to your device whenever you turn on your device.

1Turn on the device. Press and hold the Registration button for about 3 seconds.

The device enters the Bluetooth pairing mode and the notification light flashes red, green, and then blue for 3 minutes.

2On the Bluetooth-enabled device, access the Bluetooth setup mode and search for Bluetooth devices.

3From the search results, select the device name.

When pairing is complete, the device's name appears in the device list. When the devices are connected properly, the notification light flashes blue at regular intervals.

•The method for connecting via the Bluetooth feature may vary depending on the connected devices.

•You can connect to another device only after disconnecting a previously connected device.

English