03 USING THE REMOTE CONTROL, How to Use the Remote Control



•• Auto Power Down Function

Power

The unit turns off automatically in the following



situations:





–– In D.IN / Wi-Fi / BT mode if there is no audio

signal for 18 minutes.



Press to enter the “D.IN” mode.



D.IN







Press to select a source connected to the Soundbar.



Source







Press the (Mute) button to mute the sound.



Press it again to unmute the sound.

Mute







When pressed, the setting items such as TREBLE, or



SYNC are displayed in sequence. The desired item

Sound

can be adjusted using the Up/Down buttons.

–– To adjust the TREBLE volume, select Sound

Control

Control → TREBLE, and then use the Up/Down

buttons to adjust the volume within a -6 to +6

range.

–– Press and hold the (Sound Control) button

for about 5 seconds to adjust the sound for each

frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz,

2.5kHz, 5kHz, and 10kHz are selectable using

the Left/Right buttons and each can be

adjusted to a setting between -6 to +6 using

the Up/Down buttons. (Make sure the Sound

mode is set to “STANDARD”.)

–– If the video on the TV and audio from the

Soundbar are not synchronized, select SYNC in

Sound Control, and then set the audio delay

between 0~300 milliseconds by using the Up/

Down buttons.

–– SYNC is only supported for some functions.