Method 2. Connecting via Wi-Fi, Notes on Bluetooth connection

Notes on Bluetooth connection

•• Locate a new device within 3.28 ft (1 m) to connect via Bluetooth communication.

•• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

•• The Soundbar automatically turns off after 18 minutes in the Ready state.

•• The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances:

––If there is a strong electrical field around the Soundbar.

––If several Bluetooth devices are simultaneously paired with the Soundbar.

––If the Bluetooth device is turned off, not in place, or malfunctions.

•• Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

Method 2. Connecting via Wi-Fi

Pre-connection Checklist

•• Wi-Fi connection is available only on Samsung TV.

•• Check whether the wireless router (Wi-Fi) is turned on and the TV is connected to the router.

•• The TV and Soundbar must be connected to the same wireless network (Wi-Fi).

•• If your wireless router (Wi-Fi) uses a DFS channel, you will not be able to establish a Wi-Fi connection between the TV and Soundbar. Contact your Internet service provider for details.

•• Because the menus may differ depending on the year of manufacture, refer to your TV manual.

•• To connect the TV to the Soundbar via Wi-Fi, connect the Soundbar to the wireless router first. See page 33 for details on how to establish a Wi-Fi connection.

1.For more information about Wi-Fi connection to the Soundbar, see page 33, “Method 2. Connecting via Wi-Fi (Wireless Network)”.

2.Change the input source of the TV by using the Audio menu to Soundbar.

•• Samsung TVs released in 2017 or later

Home () Settings () Sound Sound Output [AV] Samsung Soundbar LST70T (Wi-Fi)

ENG - 28