![Adjusting the Soundbar volume with a TV remote control](/images/backgrounds/7912/791229x1.webp)
Adjusting the Soundbar volume with a TV remote control
Adjust the Soundbar volume using the TV’s remote control.
•• This function can be used with IR remote controls only. Bluetooth remote controls (remote controls that require pairing) are not supported.
•• Set the TV speaker to External Speaker to use this function.
•• Manufacturers supporting this function:
Samsung, VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA
1.Turn Off the Soundbar.
2.Push up and hold the WOOFER button for 5 seconds.
Each time you push the WOOFER button up and hold it for 5 seconds, the mode switches in the following order:
Remote Control Button
SOUNDMODE | WOOFER | 5 Sec |
| TON | |
|
| CO |
SOUNDMODE | WOOFER | 5 Sec |
| TON | |
|
| CO |
SOUNDMODE | WOOFER | 5 Sec |
| TON | |
|
| CO |
Display | Status | |
(Default mode) |
| |
Disable the TV remote control. | ||
|
|
|
|
|
|
Enable a Samsung TV’s IR remote | |
| control. |
Enable a | |
| control. |
ENG - 15