Auto Power Link
Auto Power Link automatically turns on the Soundbar when the TV is turned on.
1.Connect the Soundbar and a TV with a digital optical cable.
2.Press the Left button on the remote control for 5 seconds to turn Auto Power Link on or off.
•• Auto Power Link is set to ON by default.
(To turn off this function, turn off Auto Power on the Soundbar.)
•• Depending on the connected device, Auto Power Link may not function.
•• This function is only available in the “D.IN” mode.
Connecting a TV using an HDMI Cable
Connect to the HDMI IN (ARC) port of your TV.
HDMI IN
(ARC) HDMI Cable (not supplied)
Connect to the HDMI OUT
Bottom of the Soundbar
HDMI OUT
HDMI IN
Right Side of the Soundbar
1.With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the figure.
2.“TV ARC” appears in the display window of the Soundbar main unit and the Soundbar plays TV sound.
•• If TV sound is inaudible, press the 
(Source) button on the remote control or on the right side of the Soundbar to switch to “D.IN” mode. The screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played.
ENG - 7
