Adjusting the Soundbar volume with a TV remote control

Adjusting the Soundbar volume with a TV remote control

Use the TV menu to set the TV speaker on a Samsung TV to external speakers. (For more information, see the TV’s user manual.)

•• After installing the Soundbar, you can adjust the Soundbar’s volume using the IR remote control that came with a Samsung TV. (If you do not want to use this function, when the Soundbar is on, push the BASS button up and hold it for 5 seconds. “OFF-TV REMOTE” appears in the Soundbar’s display and the function turns off.)

To adjust the volume using only the Samsung TV remote control, push the BASS button up and hold it for more than 5 seconds until “SAMSUNG-TV REMOTE” appears in the Soundbar display.

––Each time you push the BASS button up and hold it for 5 seconds, the mode switches in the following order: “SAMSUNG-TV REMOTE” (Default mode) → “OFF-TV REMOTE” → “ALL-TV REMOTE”.

•• To adjust the Soundbar volume with the remote control that came with a TV made by a third party manufacturer, turn the Soundbar on, push the BASS button up and hold it for 5 seconds (“OFF-TV REMOTE” appears on the Soundbar’s display), release the BASS button, and then push the BASS button up and hold it again for more than 5 seconds. (“ALL-TV REMOTE” appears on the Soundbar’s display.)

––This function may not be available, depending on the remote control.

––Manufacturers supporting this function:

VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA

ENG - 21