DETACHING THE SOUNDBAR FROM THE WALL, Slightly tilt the Soundbar to insert both

7.Install the Soundbar with the attached Bracket- Wall Mount by hanging the Bracket-Wall Mount on the Holder-Screws on the wall.

•Slightly tilt the Soundbar to insert both Holder-Screw heads into Bracket-Wall Mount holes. Push the Soundbar in the direction of the arrow to make sure both sides are firmly fixed.

1.To separate the Soundbar from the wall, push it in the direction of the arrow, tilt it up slightly, and then pull it away from the wall as shown.

cSecure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an injury or damage the product.

cWhen the unit is installed on a wall, please make sure that children do not pull any of the connecting cables, as this may cause it to fall.

cFor the optimal performance of a wall mount installation, install the speaker system at least 2 inches (5 cm) below the TV, if the TV is mounted on the wall.

cFor your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it is unlikely to fall.