8
9
8 |
9 |
| Bluetooth | Press to turn the Bluetooth POWER On | |
| POWER | function on and off. When the Bluetooth | |
| POWER On function is on, | |
| ON - BLUETOOTH POWER appears in | |
| the Soundbar’s display. | |
| SOUND | You can select from TREBLE, BASS, | |
| CONTROL | SUBWOOFER LEVEL, or AUDIO SYNC. | |
| • | Press to select TREBLE, BASS, |
|
| SUBWOOFER LEVEL, or AUDIO SYNC. |
|
| Then, use the , buttons to adjust the |
|
| Treble or Bass volume from |
|
| SUBWOOFER LEVEL volume from |
| • | +6. |
| If the video and audio between the TV and | |
|
| your Soundbar are not synchronized, select |
|
| the AUDIO SYNC in Sound Control, and then |
|
| set audio delay between 0~300 milliseconds |
| • | by using the , buttons. |
| Each time you press and hold this button, | |
|
| |
|
| alternate. |
Controlling the Soundbar using Your TV Remote Control
1.Press and hold the 
SOUND button for more than 5 seconds while the Soundbar is turned on.
cTV menus differ by manufacturer and model. Refer to the TV's user manual for further information. c Only the VOL +/- and MUTE buttons will be available to control the Soundbar.
c This function is not available when the Soundbar is in the TV SoundConnect mode. c Manufacturers supporting this function:
•VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA•This function may not be compatible with your TV's remote depending on the remote control's manufacturer.
cTo turn off this function, press the 
SOUND button for 5 seconds. "OFF - TV REMOTE" appears on the Soundbar's display.
Installing the Battery in the Remote Control
1.Use a suitable coin to turn the remote control's battery cover counterclockwise to remove it as shown in the figure above.
2.Insert a 3V lithium battery. Keep the positive (+) pole facing up when inserting the battery. Put the battery cover on, and then align the '●' marks side by side as shown in the figure above.
3.Use a suitable coin to turn the remote control battery cover clockwise as far as it will go to fix it in place.
