DESCRIPTIONS
++Controlling the Soundbar using Your TV Remote Control
1.Press and hold the 
SOUND button for more than 5 seconds while the Soundbar is turned on.
2."ON - TV REMOTE" appears on the Soundbar's display.
3.In the TV's menu, set the TV speaker to external speaker.
●● Not available if the TV ARC function or HDMI mode is in use. | |||
●● All buttons are not available except the VOL +/- and the | (Mute) buttons in this function. | ||
●● TV menus differ by manufacturer and model. Refer to the TV's user manual for further information. | |||
●● Manufacturers supporting this function: |
| ||
VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA | |||
This function may not be compatible with your TV's remote depending on the remote control's manufacturer. | |||
●● To turn off this function, press the | SOUND button for 5 seconds. | ||
"OFF - TV REMOTE" appears on the Soundbar's display. |
| ||
INSTALLING THE BATTERY IN THE REMOTE CONTROL
ENG
1.Use a suitable coin to turn the remote control's battery cover counterclockwise to remove it as shown in the figure above.
2.Insert a 3V lithium battery. Keep the positive (+) pole facing up when inserting the battery. Put the battery cover on and align the '●' marks side by side as shown in the figure above.
3.Use a suitable coin to turn the remote control battery cover clockwise as far as it will go to fix it in place.
11
