Connecting to a TV Using a Digital Optical Cable
Check the OPTICAL IN port of
the Soundbar main unit.
OPTICAL IN
Bottom of Soundbar
Soundbar
Optical Cable
OPTICAL OUT
Check the OPTICAL OUT
port of your TV.
1.Connect the OPTICAL IN (Audio) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable.
2.Press the button on the top panel of the Soundbar or the SOURCE button on the remote control to select the D.IN mode.
D.IN
cIf TV sound is not output, press the button on the top of your Soundbar or the SOURCE button on the remote control to select the D.IN mode on Soundbar main unit display.
cIf the Soundbar main unit display does not change to D.IN, disconnect the HDMI cable.
cPress the button on the remote control for 5 seconds to turn Auto Power Link on or off. (Auto Power Link is set to ON by default.)
· 6 · English