Connecting the Subwoofer Manually if the Automatic Connection Fails

CONNECTIONS

Connecting the Subwoofer Manually if the Automatic Connection Fails

++Before You Begin

●● Make sure that the Soundbar and the subwoofer are plugged in. ●● Make sure that the Soundbar is turned on.

1.Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. The red indicator on the rear of the subwoofer turns off and the blue indicator blinks.

Rear of Subwoofer

2.Turn off the Soundbar.

3.Press and hold the VOL button on the remote control for at least 5 seconds with the Soundbar turned off (OFF).

4.The ID SET message appears on the display of the Soundbar for a short period of time, and then disappears.

ID SET

Right Side of the Soundbar

5.When the blue indicator on the subwoofer blinks, turn on the power by pressing button on the right side of the main unit or on the remote control.

20