Bluetooth, To connect the Soundbar to a Bluetooth device

•You will see BT READY or BT PAIRING on the front display of the Soundbar.

2.Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's user manual.)

3.Select "[AV] Samsung Soundbar Kxxx" from the list.

•When the Soundbar is connected to the Bluetooth device, it will display [Bluetooth device name]  BT on the front display.

•The device name can only be displayed in English. An underline " _ " will be displayed if the name is not in English.

•If the Bluetooth device has failed to pair with the Soundbar, delete the previous "[AV] Samsung Soundbar

Kxxx" found by the Bluetooth device, switch to BT PAIRING mode by pressing and holding the button on the main unit’s right side or the SOURCE button on the remote control, and then have the Bluetooth device search for the Soundbar again.

4.Play music on the connected device.

•You can listen to the music playing on the connected Bluetooth device over the Soundbar.

•In BT mode, the Play / Pause / Next / Prev functions are not available. However, these functions are available on Bluetooth devices supporting AVRCP.

●● If asked for a PIN code when connecting a Bluetooth device, enter <0000>. ●● Only one Bluetooth device can be paired at a time.

●● The Bluetooth connection will be terminated when you turn the Soundbar off.

●● The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances:

--If there is a strong electrical field around the Soundbar.

--If several Bluetooth devices are simultaneously paired with the Soundbar. --If the Bluetooth device is turned off, not in place, or malfunctions.

●● Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, which can cause electric interference.

27