04 CONNECTING THE SOUNDBAR
Connecting Electrical Power
Connect the Soundbar to an electrical outlet in the following order:
1.Connect the AC/DC adapter to the Soundbar.
2.Connect the power cord to a wall socket.
•• For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit)
CAUTION ! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE AC/DC ADAPTOR TO RAIN OR MOISTURE.
AC/DC Adapter
How to mount the AC/DC adapter
DIGITAL AUDIO IN (OPTICAL)
SERVICE
DC 23V
DIGITAL AUDIO IN (OPTICAL)
SERVICE
DC 23V
Rear of the Soundbar Main Unit
•• While the cable is not in use, seal it with the silicone.
NOTES•• If you unplug and reconnect the power cord when the product is turned on, the Soundbar turns on automatically.
•• Never forcibly pull the power cord of AC/ DC adapter.
•• When installing the AC/DC adapter horizontally, place it with the Samsung logo facing upward.
•• Tighten 2 or 4 screws (not supplied) on the wall or table and then insert them into the grooves on the rear of the AC/DC adapter. You cannot install the adapter directly on the floor.
•• For the mounting screws, see the following figures.
Recommended Screw specification(not supplied)
| L12 | |
0.26” | M3 | |
(6.5 mm) | ||
| ||
| 0.18” | |
| (4.5 mm) |
ENG - 17
