![Manual background](/images/backgrounds/7918/791821x1.webp)
By pressing the button, you can adjust the volume of the each speaker.
CH LEVEL | •• | Press the button to select VIRTUAL CENTER LEVEL and then adjust the volume |
CH LEVEL |
| between |
•• | If the Rear Speakers (sold separately) are connected, the setting REAR LEVEL is | |
|
| supported. To adjust the volume of the REAR LEVEL between |
|
| Down buttons. |
By pressing the button, you can set the audio function. The desired settings can be
| adjusted using the Up/Down buttons. | |
Sound Control | AUDIO SYNC VOICE ENHANCE ON/OFF NIGHT MODE ON/OFF | |
| AUDIO SYNC | |
|
| If the video on the TV and audio from the Soundbar are not synchronized, press the |
|
| (Sound Control) button to select AUDIO SYNC and then set the audio delay |
|
| between 0~300 milliseconds by using the Up/Down buttons. (Not available in “USB” |
|
| or “BT” mode.) |
| VOICE ENHANCE ON/OFF | |
|
| This mode is makes it easier to hear spoken dialog in movies and TV. |
| NIGHT MODE ON/OFF | |
|
| This mode is optimized for nighttime viewing with the settings adjusted to bring the |
|
| volume down but keep the dialog clear. |
•• The VOICE ENHANCE, and NIGHT MODE audio function can be turned ON/OFF by using the Up/Down buttons.
•• Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be adjusted to a setting between
Press the PAIR button. “BT PAIRING” appears in the Soundbar’s display.
Bluetooth
PAIR
You can connect the Soundbar to a new Bluetooth device in this mode by selecting the Soundbar from the Bluetooth device's search list.
Press the pbutton to pause a music file temporarily.
When you press the button again, the music file plays.
Play / Pause
ENG - 11