;; When connecting a new device, switch to “BT PAIRING” for connection. (Press the 
PAIR button on the remote control or press the 
(Source) button on the body for at least 5 seconds.)
;; If the Soundbar is connected to another device, disconnect that device first to switch the device.
;; Reconnect it after removing the Bluetooth speaker list on the device to connect. (Samsung TV: Home ( 
) → Menu → Settings ( 
) → All Settings ( 
) → Sound
→Sound Output → Bluetooth Speaker List)
;; Remove and reconnect the power plug, then try again.
;; Reset the product and try again. (See page 32.)
Sound drops out when connected via Bluetooth.;; Some devices can cause radio interference if they are located too close to the Soundbar. e. g. microwaves, wireless routers, etc.
;; If your device that is connected via Bluetooth moves too far away from the Soundbar, it may cause the sound to drop out. Move the device closer to the Soundbar.
;; If a part of your body is in contact with the
Bluetooth transceiver or the product is installed on metal furniture, sound may drop out. Check the installation environment and conditions for use.
Soundbar does not turn on automatically with the TV.;; When you turn off the Soundbar while watching TV, power synchronization with the TV is disabled. First turn off the TV.
14 LICENSE
Dolby, Dolby Audio, and the
Dolby Laboratories. Confidential unpublished works. Copyright
All rights reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in
combination with the Symbol, and DTS 2.0
Channel are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Samsung Electronics Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.
ENG - 35
