Pre-connectionChecklist

Samsung Standard

HW-B450 HW-B450/ZA

Download 39 pages 15.13 Kb View all pages
Page 20
Page screenshot 20
05 USING A WIRED CONNECTION TO THE TV
05 USING A WIRED CONNECTION TO THE TV

Hear TV sound from your Soundbar through wired or wireless connections.

•• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control.

––This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable.

––This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute.

Connecting using an Optical Cable

When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may use different words for Dolby Digital and PCM depending on the TV manufacturer.)

Pre-connection Checklist

•• When you use an optical cable and the terminals have covers, be sure to remove the covers.

Bottom of the Soundbar

Optical Cable

DIGITAL AUDIO IN (OPTICAL)

OPTICAL OUT

Top of the Soundbar

 Connecting using an Optical Cable

D.IN

1.Connect the DIGITAL AUDIO IN (OPTICAL) port on the Soundbar to the OPTICAL OUT port of the TV with a digital optical cable.

2.Press the Pre-connection Checklist (Source) button on the top panel or remote control, and then select the “D.IN” mode.

ENG - 20

Page 20
Page screenshot 20
Pre-connectionChecklist - Samsung Standard HW-B450/ZA