07 CONNECTING A MOBILE DEVICE, Connecting via Bluetooth

07 CONNECTING A MOBILE DEVICE

Connecting via Bluetooth

When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.

•• You cannot connect more than one Bluetooth device at a time.

Bluetooth device

The initial connection

1.Press the (Source) button on the right side panel or on the remote control, and then select “BT”.

2.Change “BT” to “BT PAIRING”.

•• When “BT READY” appears, press the PAIR button on the remote control or press and hold the (Source) button on the right side panel of the Soundbar for more than 5 seconds to display “BT PAIRING”.

3.Select “[AV] Samsung Soundbar Nxxx N-Series” from the list that appears.

•• When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] → “BT” appears in the front display.

4.Play music files from the device, connected via Bluetooth, through the Soundbar.

NOTE

•• After you have connected the Soundbar to your mobile device the first time, use the “BT READY” mode to reconnect. See Page 15 for details.

If the device fails to connect

•• If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar Nxxx N-Series”) appears in the list, delete it.

•• Press the PAIR button on the remote control or in “BT” mode, press and hold the (Source) button for more than 5 seconds on the right side of the Soundbar to switch to “BT PAIRING” mode. Then, select “[AV] Samsung Soundbar Nxxx N-Series” from the Bluetooth device search list.

ENG - 14