Safety Information
SAFETY WARNINGS
WARNING
CAUTION
FCC NOTE (for U.S.A): Important Safety Instructions Precautions About this Manual CONTENTS
Checking the Components
Product Overview
Connecting the Soundbar
Connecting to your TV
Connecting an External Device
Connecting a USB Connecting a Mobile Device
Using the Remote Control
Software Update
Installing the Wall Mount
Troubleshooting
License
Open Source License Notice
Important Notes About Service
Specifications and Guide 01 Checking the Components
Soundbar Main Unit
Wireless Surround Speaker SET Inserting Batteries before using the Remote Control (AA batteries X 2) 02 Product Overview
Front Panel / Right Side Panel of the Soundbar
Bottom Panel of the Soundbar 03 Connecting the Soundbar
Connecting Electrical Power Connecting the Wireless Surround Speaker
1. Connect the Wireless Receiver Module to 2 Surround Speakers
2. Check the standby status after plugging into an electrical outlet Attach the Toroidal Ferrite Core to the Power Cord of the Soundbar
3. Connect the main unit of the Soundbar to the Wirless Dongle 4. Turn off the Soundbar
OFF
5. Configure “ID SET” using the Soundbar’s remote control
ID SET
6. Turn on the Soundbar 7. Check if the LINK LED is solid blue (connection complete) 04 Connecting to your TV
Connecting a TV using an HDMI Cable
TV
ARC Connecting using an Optical Cable
D.IN
Auto Power Link Method 2. Connecting Wirelessly
Connecting a TV via Bluetooth
The initial connection
If the device fails to connect
What are the BT READY and BT PAIRING statuses Disconnecting the Soundbar from the TV
Connecting via Wi-Fi
Pre-connectionChecklist Step 1 : Connecting the Soundbar to Wi-Fi
Step 2 : Configuring Settings on the TV For TVs released in
For TVs released in
Multiroom Link - Settings
Soundbar+Surround
[AV] Samsung Soundbar MSxxx
TV Sound Output
Multiroom Link
Speaker Settings
Soundbar+Surround
NOTES HDMI Connecting using an Optical or Analog Audio (AUX) Cable
Optical Cable
Audio (AUX) Cable 06 Connecting a USB
USB 07 Connecting a Mobile Device
Method 1. Connecting via Bluetooth
If the device fails to connect Method 2. Connecting via Wi-Fi(Wireless Network) Samsung Multiroom
Settings
Add Speaker
Surround Setup
Done
Soundbar
NOTE 08 Using the Remote Control
How to Use the Remote Control Adjusting the Soundbar volume with a TV remote control 09Software Update
10Installing the Wall Mount
Installation Precautions
Wallmount Components Center Line
Wall mount Guide
Holder-Screw Assembling the Holder-Cable 11 Troubleshooting 12 License
13Open Source License Notice 14 Important Notes About Service
15 Specifications and Guide
Specifications Wireless Surround Speaker SET
Weight
Surround Speaker
Dimensions
(W x H x D)
Surround Speaker
Operating Temperature Range
Operating Humidity Range
NOTES
Wi-Fi/Ethernet
Port deactivation method
Bluetooth
Port deactivation method
SPK ADD LIMITED WARRANTY TO ORIGINAL PURCHASER