CONNECTING TO YOUR TV, Method 1. Connecting with a Cable, D.IN

CONNECTING TO YOUR TV

You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.

cImportant: Before you begin, put the battery into the remote. See page 16 for instructions.

Method 1. Connecting with a Cable

Check the DIGITAL AUDIO IN (OPTICAL) port of the Soundbar main unit.

Soundbar

DIGITAL AUDIO IN (OPTICAL)

Bottom of Soundbar

Optical Cable

OPTICAL OUT

Check the OPTICAL OUT

port of your TV.

1.Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable.

2.Press the button on the right side of the Soundbar or the SOURCE button on the remote control to select the D.IN mode.

D.IN

cIf TV sound is not output, press thebutton on the right side of your Soundbar or the SOURCE button on the remote control to select the D.IN mode on Soundbar main unit display.

cIf the Soundbar main unit display does not change to D.IN, disconnect the HDMI cable.

cPress the  button on the remote control for 5 seconds to turn Auto Power Link on or off. (Auto Power Link is set to ON by default.)

· 5 · English