Maintaining water resistance

Getting started

Maintaining water resistance

Your device supports water-resistance. Follow these tips carefully to maintain the water- resistance of your device. Failure to do so may result in damage to your device.

•Do not immerse the device in water deeper than 1 m or keep it submerged for more than 30 minutes.

•Do not expose the device to water moving with force.

•If the device is exposed to clean water, dry it thoroughly with a clean, soft cloth. If the device is exposed to other liquids, such as salt water, ionised water, or alcoholic beverage, rinse it with clean water and dry it thoroughly with a clean, soft cloth. If you do not follow these instructions, the device’s performance and appearance may be affected.

•If the device has been immersed in water or the microphone or speaker is wet, sound may not be heard clearly during a call. Wipe the device with a dry cloth or dry it thoroughly before using it.

•Your device has been tested in a controlled environment and certified to be water- resistant in specific situations (meets requirements of classification IPX7 as described by the international standard IEC 60529-Degrees of Protection provided by Enclosures [IP Code]; test conditions: 15-35 °C, 86-106 kPa, 1 meter, 30 minutes). Despite this classification, it is still possible for your device to be damaged in certain situations.

English (USA)

4

2